Fanuc

Fanuc alarm: 5041 - CAN NOT COMMANDED G110 BLOCK (T series)

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, ,
5041 - CAN NOT COMMANDED G110 BLOCK (T series)

Alarm Description

Blocks containing the G110 codes were successively specified in tool-tip radius compensation for the B-axis.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 5041 - CAN NOT COMMANDED G110 BLOCK (T series)) error message below.

Fanuc alarm: 5040 - CAN NOT COMMANDED B-AXIS MOVE (T series)

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, ,
5040 - CAN NOT COMMANDED B-AXIS MOVE (T series)

Alarm Description

The machine could not move about the B-axis because parameter No.8250 was incorrectly specified, or because the PMC axis system could not be used.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 5040 - CAN NOT COMMANDED B-AXIS MOVE (T series)) error message below.

Fanuc alarm: 5039 - START UNREGISTERED B-AXIS PROG (T series)

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, ,
5039 - START UNREGISTERED B-AXIS PROG (T series)

Alarm Description

An attempt was made to execute a program for the B-axis which had not been registered.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 5039 - START UNREGISTERED B-AXIS PROG (T series)) error message below.

Fanuc alarm: 5038 - TOO MANY START M-CODE COMMAND (T series)

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, ,
5038 - TOO MANY START M-CODE COMMAND (T series)

Alarm Description

More than six M codes for starting movement about the B-axis were specified.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 5038 - TOO MANY START M-CODE COMMAND (T series)) error message below.

Fanuc alarm: 5037 - ADDRESS Q NOT DEFINED IN G83 (T series)

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, ,
5037 - ADDRESS Q NOT DEFINED IN G83 (T series)

Alarm Description

Depth of cut Q was not specified for the G83 code (peck drilling cycle). Alternatively, 0 was specified in Q for the B-axis.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 5037 - ADDRESS Q NOT DEFINED IN G83 (T series)) error message below.

Fanuc alarm: 5036 - ADDRESS R NOT DEFINED IN G81-G86 (T series)

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, ,
5036 - ADDRESS R NOT DEFINED IN G81-G86 (T series)

Alarm Description

Point R was not specified for the canned cycle for the B-axis.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 5036 - ADDRESS R NOT DEFINED IN G81-G86 (T series)) error message below.

Fanuc alarm: 5035 - NO FEEDRATE COMMANDED B-AXIS (T series)

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, ,
5035 - NO FEEDRATE COMMANDED B-AXIS (T series)

Alarm Description

A feedrate was not specified for cutting feed about the B-axis.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 5035 - NO FEEDRATE COMMANDED B-AXIS (T series)) error message below.

Fanuc alarm: 5034 - PLURAL COMMAND IN G110 (T series)

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, ,
5034 - PLURAL COMMAND IN G110 (T series)

Alarm Description

Multiple movements were specified with the G110 code for the B-axis.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 5034 - PLURAL COMMAND IN G110 (T series)) error message below.

Fanuc alarm: 5033 - NO PROG SPACE IN MEMORY B-AXIS (T series)

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, ,
5033 - NO PROG SPACE IN MEMORY B-AXIS (T series)

Alarm Description

Commands for movement about the B-axis were not registered because of insufficient program memory.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 5033 - NO PROG SPACE IN MEMORY B-AXIS (T series)) error message below.

Fanuc alarm: 5032 - NEW PRG REGISTERED IN B-AXIS MOVE (T series)

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, ,
5032 - NEW PRG REGISTERED IN B-AXIS MOVE (T series)

Alarm Description

While the machine was moving about the B-axis, at attempt was made to register another move command.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 5032 - NEW PRG REGISTERED IN B-AXIS MOVE (T series)) error message below.
Subscribe to Fanuc

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer