Fanuc

HPCC mode cannot be canceled during G51 (scaling) or G68 (coordinate system rotation). Correct the program.

Sequence number 7xxx has been read during search for the next sequence number at program restart for the return/restart function.

Axes having different increment systems have been specified in the same DI/DO group for PMC axis control. Modify the setting of parameter No. 8010.

Circular interpolation has been specified on a plane consisting of axes having different increment systems.

Function category: Work piece thickness measurement Alarm details The position counter was not preset before the start of work piece thickness measurement. This alarm is issued in the following cases: (1) An attempt has been made to start measurement without first establishing the origin. (2) An attempt has been made to start measurement without first presetting the position counter after manual return to the origin.

The value specified in an exponential interpolation command (G02.3/03.3) is illegal. A value that does not allow exponential interpolation is specified. (For example, a negative value is specified in In.)

The exponential interpolation command (G02.3/G03.3) has a format error. Address I, J, or K is not specified. The value of address I, J, or K is 0.

There is a parameter setting error. Parameter No. 5641 (setting of the linear axis) is not set. The axis set in parameter No. 5641 is not a linear axis. Parameter No. 5642 (setting of a rotation axis) is not set. The axis set in parameter No. 5642 is not a rotation axis. The linear and rotation axes cannot be controlled by the CNC. (The value set in parameter No. 1010 is exceeded.)

A radius exceeding nine digits has been specified for circular interpolation with the center of the arc specified with I, J, and K.

A command for switching the major axis has been specified for circular threading. Alternatively, a command for setting the length of the major axis to 0 has been specified for circular threading.