16/18/21

The number of files exceeds the limit during communication with the built-in Handy File.

A floppy disk in the built-in Handy File is write protected.

There are duplicate file names in the built-in Handy File.

A specified file is not found during communication with the built-in Handy File.

The SRAM correctable error cannot be corrected. Cause: A memory problem occurred during memory initialization. Action: Replace the master printed circuit board (SRAM module).

A parameter for automatically set a reference position is set. (Bit 2 of parameter No. 1819 = 1) Perform automatic setting. (Position the machine at the reference position manually, then perform manual reference position return.) Supplementary: Automatic setting sets bit 2 of parameter No. 1819 to 0.

There is an inclination compensation parameter setting error. Cause: 1. The number of pitch error compensation points between the negative (-) end and positive (+) end exceeds 128. 2. The relationship in magnitude among the inclination compensation point numbers is incorrect. 3. An inclination compensation point is not located between the negative (-) end and positive (+) end of the pitch error compensation points. 4. The amount of compensation per compensation point is too large or too small. Correct the parameter.

Data transfer to the memory card failed. Check whether the memory card space is insufficient and whether the memory card was removed during data transfer.

The memory card cannot be used. Check the memory card. (Check whether the memory card is write-protected or defective.)

There is a parameter setting error. Check that 4 is set as the I/O channel.