16i/18i/21i

Fanuc alarm: 177 - CHECK SUM ERROR (G05 MODE)

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
177 - CHECK SUM ERROR (G05 MODE)

Alarm Description

Check sum error. Modify the program.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 177 - CHECK SUM ERROR (G05 MODE)) error message below.

Fanuc alarm: 176 - IMPROPER G CODE IN G107

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
176 - IMPROPER G CODE IN G107

Alarm Description

Any of the following G codes which cannot be specified in the cylindrical interpolation mode was specified. 1) G codes for positioning: G28, G76, G81 -G89, including the codes specifying the rapid traverse cycle. 2) G codes for setting a coordinate system: G50 G52. 3) G code for selecting coordinate system: G53 G54 G59. Modify the program.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 176 - IMPROPER G CODE IN G107) error message below.

Fanuc alarm: 175 - ILLEGAL G107 COMMAND

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
175 - ILLEGAL G107 COMMAND

Alarm Description

Conditions when performing circular interpolation start or cancel not correct. To change the mode to the cylindrical interpolation mode, specify the command in a different format. Modify the program.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 175 - ILLEGAL G107 COMMAND ) error message below.

Fanuc alarm: 169 - ILLEGAL TOOL GEOMETRY DATA

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
169 - ILLEGAL TOOL GEOMETRY DATA

Alarm Description

Incorrect tool figure data in interference check. Set correct data, or select correct tool figure data.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 169 - ILLEGAL TOOL GEOMETRY DATA) error message below.

Fanuc alarm: 163 - COMMAND G68/G69 INDEPENDENTLY T series (At two-path)

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
163 - COMMAND G68/G69 INDEPENDENTLY T series (At two-path)

Alarm Description

G68 and G69 are not independently commanded in balance cut. Modify the program.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 163 - COMMAND G68/G69 INDEPENDENTLY T series (At two-path)) error message below.

Fanuc alarm: 161 - G72.1 NESTING ERROR

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
161 - G72.1 NESTING ERROR

Alarm Description

A subprogram which performs parallel copy with G72.2 contains another G72.2 command.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 161 - G72.1 NESTING ERROR) error message below.

Fanuc alarm: 160 - MISMATCH WAITING M-CODE / G72.1 NESTING ERROR

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
160 - MISMATCH WAITING M-CODE / G72.1 NESTING ERROR

Alarm Description

Different M code is commanded in heads 1 and 2 as waiting M code. Modify the program. A subprogram which performs rotational copy with G72.1 contains another G72.1 command.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 160 - MISMATCH WAITING M-CODE / G72.1 NESTING ERROR) error message below.

Fanuc alarm: 159 - TOOL DATA SETTING INCOMPLETE

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
159 - TOOL DATA SETTING INCOMPLETE

Alarm Description

During executing a life data setting program, power was turned off. Reset again.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 159 - TOOL DATA SETTING INCOMPLETE) error message below.

Fanuc alarm: 158 - ILLEGAL TOOL LIFE DATA

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
158 - ILLEGAL TOOL LIFE DATA

Alarm Description

The tool life to be set is too excessive. Modify the setting value.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 158 - ILLEGAL TOOL LIFE DATA) error message below.

Fanuc alarm: 157 - TOO MANY TOOL GROUPS

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
157 - TOO MANY TOOL GROUPS

Alarm Description

The number of tool groups to be set exceeds the maximum allowable value. (See parameter No. 6800 bit 0 and 1) Modify the program.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 157 - TOO MANY TOOL GROUPS) error message below.
Subscribe to 16i/18i/21i

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer