Fanuc

Fanuc alarm: PS093 - DUPLICATE NC-WORD & M99

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS093 - DUPLICATE NC-WORD & M99
Alarm Description

An address other than O, N, P, and L is specified in the same block as M99 under the macro modal call condition (G67)

Additional Suggestions & Alarm Clarification

Change your CNC Program

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS093 - DUPLICATE NC-WORD & M99 message please post comments below.

Fanuc alarm: PS092 - DUPLICATE MACRO-CALL WORD

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS092 - DUPLICATE MACRO-CALL WORD
Alarm Description

A macro call command was specified twice or more in the same block.

Additional Suggestions & Alarm Clarification

Change your CNC Program

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS092 - DUPLICATE MACRO-CALL WORD message please post comments below.

Fanuc alarm: PS091 - DUPLICATE SUB-CALL WORD

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS091 - DUPLICATE SUB-CALL WORD
Alarm Description

A subprogram call command was specified twice or more in the same block.

Additional Suggestions & Alarm Clarification

Change your CNC Program

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS091 - DUPLICATE SUB-CALL WORD message please post comments below.

Fanuc alarm: PS090 - DUPLICATE NC, MACRO STATEMENT

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS090 - DUPLICATE NC, MACRO STATEMENT
Alarm Description

NC statement and macro statement were specified in the same block.

Additional Suggestions & Alarm Clarification

Change your CNC Program

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS090 - DUPLICATE NC, MACRO STATEMENT message please post comments below.

Fanuc alarm: PS077 - PROGRAM IN USE

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS077 - PROGRAM IN USE
Alarm Description

A program being edited in the background was called for execution in the foreground.

Additional Suggestions & Alarm Clarification

End the background editing of all programs and this alarm should disappear. If not power down machine and back up.

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS077 - PROGRAM IN USE message please post comments below.

Fanuc alarm: PS076 - PROGRAM NOT FOUND

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS076 - PROGRAM NOT FOUND
Alarm Description

The program having the program number called by M98, G65, G66, G66.1, G/M/T codes is not found.

Additional Suggestions & Alarm Clarification

Change your CNC Program

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS076 - PROGRAM NOT FOUND message please post comments below.

Fanuc alarm: PS069 - ILL COMMAND IN Q-BLOCK

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS069 - ILL COMMAND IN Q-BLOCK
Alarm Description

Chamfering or corner R is specified in a Q sequence number block specified in the canned cycle G70 to G73.

Additional Suggestions & Alarm Clarification

Change your CNC Program

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS069 - ILL COMMAND IN Q-BLOCK message please post comments below.

Fanuc alarm: PS067 - G70-G73 AT FORBIDDEN MODE

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS067 - G70-G73 AT FORBIDDEN MODE
Alarm Description

Canned cycles G70, G71, G72, and G73 are specified in a mode other than the memory mode.

Additional Suggestions & Alarm Clarification

Change your CNC Program

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS067 - G70-G73 AT FORBIDDEN MODE message please post comments below.

Fanuc alarm: PS066 - ILL COMMAND IN PROGRAM

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS066 - ILL COMMAND IN PROGRAM
Alarm Description

A G code in group 01 other than G00, G01, G02, and G03, a one-shot G code other than G04, or G65, G66, G67, M98, or M99 is specified in the sequence number blocks designated by P and Q of G70, G71 and G72.

Additional Suggestions & Alarm Clarification

Change your CNC Program

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS066 - ILL COMMAND IN PROGRAM message please post comments below.

Fanuc alarm: PS065 - ILL COMMAND IN P-BLOCK

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS065 - ILL COMMAND IN P-BLOCK
Alarm Description

G code G00 or G01 of group 01 in the P sequence number block specified in the canned cycle G70, G71, G72 blocks is not commanded.

Additional Suggestions & Alarm Clarification

Change your CNC Program

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS065 - ILL COMMAND IN P-BLOCK message please post comments below.
Subscribe to Fanuc

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer