16/18/21

No decimal point has been specified for an address requiring a decimal point.

The P data in selection of the grinding-wheel wear compensation center is illegal.

The continuous high-speed skip command has one of the following errors: 1. The axis along which the tool is moved is not specified. 2. More than one axis is specified as the axis along which the tool is moved. Alternatively, the EGB skip command has one of the following errors: 1. A move command is specified for the EGB axis (work piece axis). 2. More than one axis is specified. 3. P is not specified. 4. The specified Q value exceeds the allowable range. Correct the program.

HPCC mode cannot be canceled during G51 (scaling) or G68 (coordinate system rotation). Correct the program.

Sequence number 7xxx has been read during search for the next sequence number at program restart for the return/restart function.

Axes having different increment systems have been specified in the same DI/DO group for PMC axis control. Modify the setting of parameter No. 8010.

Circular interpolation has been specified on a plane consisting of axes having different increment systems.

Function category: Work piece thickness measurement Alarm details The position counter was not preset before the start of work piece thickness measurement. This alarm is issued in the following cases: (1) An attempt has been made to start measurement without first establishing the origin. (2) An attempt has been made to start measurement without first presetting the position counter after manual return to the origin.

The value specified in an exponential interpolation command (G02.3/03.3) is illegal. A value that does not allow exponential interpolation is specified. (For example, a negative value is specified in In.)

The exponential interpolation command (G02.3/G03.3) has a format error. Address I, J, or K is not specified. The value of address I, J, or K is 0.