16/18/21

M code, S code or T code is specified with safety zone auto setting command (G32). G32 is specified in the nibbling mode, in the cutter compensation, in the rotation mode or the scaling mode.

In safety zone auto setting, the safety zone pieces are not correct. Or the position detector has gone wrong, please tell your machine tool builder.

The feed rate of safety zone auto setting is other than the parameter value (No. 16538, No. 16539).

When a safety zone check was executed, the machine moving in the negative Y direction entered area 4 into which entry is inhibited.

When a safety zone check was executed, the machine moving in the positive Y direction entered area 4 into which entry is inhibited.

When a safety zone check was executed, the machine moving in the negative Y direction entered area 3 into which entry is inhibited.

When a safety zone check was executed, the machine moving in the positive Y direction entered area 3 into which entry is inhibited.

When a safety zone check was executed, the machine moving in the negative Y direction entered area 2 into which entry is inhibited.

When a safety zone check was executed, the machine moving in the positive Y direction entered area 2 into which entry is inhibited.

When a safety zone check was executed, the machine moving in the negative Y direction entered area 1 into which entry is inhibited.