0i

Fanuc alarm: 153 - T-CODE NOT FOUND

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
153 - T-CODE NOT FOUND

Alarm Description

In tool life data registration, a T code was not specified where one should be. Correct the program.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 153 - T-CODE NOT FOUND) error message below.

Fanuc alarm: 152 - NO SPACE FOR TOOL ENTRY

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
152 - NO SPACE FOR TOOL ENTRY

Alarm Description

The number of tools within one group exceeds the maximum value registerable. Modify the number of tools.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 152 - NO SPACE FOR TOOL ENTRY) error message below.

Fanuc alarm: 151 - TOOL GROUP NUMBER NOT FOUND

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
151 - TOOL GROUP NUMBER NOT FOUND

Alarm Description

The tool group commanded in the machining program is not set. Modify the value of program or parameter.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 151 - TOOL GROUP NUMBER NOT FOUND) error message below.

Fanuc alarm: 150 - ILLEGAL TOOL GROUP NUMBER

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
150 - ILLEGAL TOOL GROUP NUMBER

Alarm Description

Tool Group No. exceeds the maximum allowable value. Modify the program.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 150 - ILLEGAL TOOL GROUP NUMBER) error message below.

Fanuc alarm: 149 - FORMAT ERROR IN G10L3

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, , 0i
149 - FORMAT ERROR IN G10L3

Alarm Description

A code other than Q1,Q2,P1 or P2 was specified as the life count type in the extended tool life management.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 149 - FORMAT ERROR IN G10L3) error message below.

Fanuc alarm: 148 - ILLEGAL SETTING DATA

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
148 - ILLEGAL SETTING DATA

Alarm Description

Automatic corner override deceleration rate is out of the settable range of judgment angle. Modify the parameters (No.1710 to No.1714)

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 148 - ILLEGAL SETTING DATA) error message below.

Fanuc alarm: 146 - IMPROPER G CODE

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
146 - IMPROPER G CODE

Alarm Description

G codes which cannot be specified in the polar coordinate interpolation mode was specified. See section II-4.4 and modify the program.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 146 - IMPROPER G CODE) error message below.

Fanuc alarm: 145 - ILLEGAL CONDITIONS IN POLAR COORDINATE INTERPOLATION

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, , 0i
145 - ILLEGAL CONDITIONS IN POLAR COORDINATE INTERPOLATION

Alarm Description

The conditions are incorrect when the polar coordinate interpolation starts or it is canceled. 1) In modes other than G40, G12.1/G13.1 was specified. 2) An error is found in the plane selection. Parameters No. 5460 and No. 5461 are incorrectly specified. Modify the value of program or parameter.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 145 - ILLEGAL CONDITIONS IN POLAR COORDINATE INTERPOLATION) error message below.

Fanuc alarm: 144 - ILLEGAL PLANE SELECTED

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
144 - ILLEGAL PLANE SELECTED

Alarm Description

The coordinate rotation plane and arc or cutter compensation C plane must be the same. Modify the program.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 144 - ILLEGAL PLANE SELECTED) error message below.

Fanuc alarm: 143 - SCALED MOTION DATA OVER FLOW

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, , 0i
143 - SCALED MOTION DATA OVER FLOW

Alarm Description

The scaling results, move distance, coordinate value and circular radius exceed the maximum command value. Correct the program or scaling magnification.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 143 - SCALED MOTION DATA OVER FLOW) error message below.
Subscribe to 0i

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer