LX3

Yasnac LX3 CNC machine control alarms and error codes for troubleshooting and repair of CNC's.

Yasnac alarm: 325 - SERVO CPU ERROR

CNC Alarm Error Message
325 - SERVO CPU ERROR
Control Manufacturer
Yaskawa
Control Model
J50, MX3, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

SERVO CPU IS IN ABNORMAL STATE. (SET "O IN #6014 D6 TO RESET THE ERROR).

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 325 - SERVO CPU ERROR) error message below.

Yasnac alarm: 322 - CMOS VACANT AREA ERROR

CNC Alarm Error Message
322 - CMOS VACANT AREA ERROR
Control Manufacturer
Yaskawa
Control Model
J50, MX3, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

THE UNUSED AREA OF THE CMOS IS USED. (THE CMOS MAY BE DESTROYED.) (SET "1" IN #6066 D2 TO RESET THE ERROR.)

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 322 - CMOS VACANT AREA ERROR) error message below.

Yasnac alarm: 310 - SERVO OFF

CNC Alarm Error Message
310 - SERVO OFF
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3, LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

SERVO POWER NOT SUPPLIED

Additional Suggestions & Alarm Clarification

Servo Drives are off. Condition exists that is not allowing a power on. Check drives for faults or Fault LEDS.

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 310 - SERVO OFF) error message below.

Yasnac alarm: 272 - P-SET ERROR (Z)

CNC Alarm Error Message
272 - P-SET ERROR (Z)
Control Manufacturer
Yaskawa
Control Model
LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

P SET ERROR Z (IF THIS ERROR OCCURS IN BLOCK WHERE GOO IS CHANGING TO GO1, MACHINE STOPS AFTER COMPLETION OF GOO BLOCK)

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 272 - P-SET ERROR (Z)) error message below.
Subscribe to LX3

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer