I80

(1) T CODE DIGITS OVER (2) The T digit commands are excessive.

(1) S CODES DIGITS OVER (2) Command of the number of S digits was excessive

(1) MULTIPLE S CODE (2) Command was for multiple S codes when there were no multiple S control options.

(1) MIRROR IMAGAE, ERROR (2) Command was for G in a mirror image in which a mirror image cannot be used, or a mirror image is ON in a mirror image prohibited mode.

(1) NO COMPLETION COMMAND (2) There is no M02/30 completion command in memory operation

(1) I, S, T CANNOT COMMAND (2) Command was for M, S, T in a block in which M, S, T cannot be specified.

(1) M93 COMMAND ERROR (2) Command M93 was used although it was unavailable (Option is not set)

(1) M90/M91 FORMAT ERROR (2) Input command M191 contains an error.

(1) M90/M91 COMMAND ERROR (2) Command M90 or M91 was used although it was unavailable

(1) INTERNAL M COMMAND ERROR (2) There is error in internal M code command.