10/11/12

Fanuc alarm: PS198 - STROKE THAN MINIMUM ANGLE

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS198 - STROKE THAN MINIMUM ANGLE
Alarm Description

Values other than multiple integral of the least angle for indexing the index table are commanded.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS198 - STROKE THAN MINIMUM ANGLE message please post comments below.

Fanuc alarm: PS197 - OTHER AXIS ARE COMMANEDED

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS197 - OTHER AXIS ARE COMMANEDED
Alarm Description

The indexing axis of the index table and other control axes are commanded at the same time.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS197 - OTHER AXIS ARE COMMANEDED message please post comments below.

Fanuc alarm: PS196 - ILLEGAL DRILLING AXIS SELECT

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS196 - ILLEGAL DRILLING AXIS SELECT
Alarm Description

Selection of drilling axis was not correctly specified in canned cycle for drilling.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS196 - ILLEGAL DRILLING AXIS SELECT message please post comments below.

Fanuc alarm: PS195 - ILLEGAL AXIS SELECTED (G96)

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS195 - ILLEGAL AXIS SELECTED (G96)
Alarm Description

A P value specified in G96 block or parameter 5640 value is in error.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS195 - ILLEGAL AXIS SELECTED (G96) message please post comments below.

Fanuc alarm: PS194 - ZERO RETURN END NOT ON REF

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS194 - ZERO RETURN END NOT ON REF
Alarm Description

The axis specified by G28 (automatic reference point return) does not return to the correct reference point at the end of positioning.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS194 - ZERO RETURN END NOT ON REF message please post comments below.

Fanuc alarm: PS192 - ILLEGAL LEAD COMMAND (G34)

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS192 - ILLEGAL LEAD COMMAND (G34)
Alarm Description

In variable lead thread cutting, the lead increase/decrease amount given by address K is exceeding the maximum command value; or the lead is commanded with minus value or the value exceeding the maximum lead.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS192 - ILLEGAL LEAD COMMAND (G34) message please post comments below.

Fanuc alarm: PS191 - OVER TOLERANCE OF RADIUS

CNC Machine Control Manufacturer
Fanuc
Control Model
10/11/12
PS191 - OVER TOLERANCE OF RADIUS
Alarm Description

An arc, where the difference of radius values at start point and end point is larger than the parameter set value, was specified. (Parameter 2410)

Additional Suggestions & Alarm Clarification

None currently

Help Others
Any additional suggestions or recommendations on the Fanuc alarm: PS191 - OVER TOLERANCE OF RADIUS message please post comments below.
Subscribe to 10/11/12

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer