Fanuc

Fanuc alarm: 4052 - TRACE DATA ERROR

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, ,
4052 - TRACE DATA ERROR

Alarm Description

In the gap control command, the value of P is out of command range.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 4052 - TRACE DATA ERROR ) error message below.

Fanuc alarm: 4051 - ASSIST GAS DATA ERR.

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, ,
4051 - ASSIST GAS DATA ERR.

Alarm Description

In the assist gas command, the value of P or Q is out of command range.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 4051 - ASSIST GAS DATA ERR. ) error message below.

Fanuc alarm: 4050 - CONTOUR DATA ERROR

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, ,
4050 - CONTOUR DATA ERROR

Alarm Description

In the interpolation mode, the value of S, P, or Q is out of command range.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 4050 - CONTOUR DATA ERROR ) error message below.

Fanuc alarm: 4021 - P/S ALARM

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, ,
4021 - P/S ALARM

Alarm Description

A minus value is commanded as a nozzle length.
A nozzle length is out of setting range.
A total length of the 2nd arm and the nozzle length is 500mm
(19.685inches) for maximum.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 4021 - P/S ALARM) error message below.

Fanuc alarm: 4017 - P/S ALARM

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, ,
4017 - P/S ALARM

Alarm Description

A G code of 01 group except for G01 is commanded during G33
mode.
Cutter compensation is commanded during G33 mode.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 4017 - P/S ALARM) error message below.

Fanuc alarm: 4016 - P/S ALARM

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, ,
4016 - P/S ALARM

Alarm Description

The radius value R is too large during G33 mode.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 4016 - P/S ALARM) error message below.

Fanuc alarm: 4012 - CANNOT CONVERT

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, ,
4012 - CANNOT CONVERT

Alarm Description

The coordinate can not be converted for G98.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 4012 - CANNOT CONVERT) error message below.

Fanuc alarm: 4008 - 3-D COORD. CONV. ALARM

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, ,
4008 - 3-D COORD. CONV. ALARM

Alarm Description

Scaling or coordinate system rotaion is commanded during three-dimension coordinate conversion.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 4008 - 3-D COORD. CONV. ALARM) error message below.
Subscribe to Fanuc

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer