0/00/0-mate

Fanuc alarm: 155 - ILLEGAL T-CODE IN M06

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
155 - ILLEGAL T-CODE IN M06

Alarm Description

In the machining program, M06 and T code in the same block do not correspond to the group in use. Correct the program. Group No.** which is specified with T** 88 of the machining program do not included in the tool group in use. Correct the program.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 155 - ILLEGAL T-CODE IN M06 ) error message below.

Fanuc alarm: 154 - NOT USING TOOL IN LIFE GROUP

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
154 - NOT USING TOOL IN LIFE GROUP

Alarm Description

When the group is not commanded, H99 or D99 was commanded. Correct the program.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 154 - NOT USING TOOL IN LIFE GROUP) error message below.

Fanuc alarm: 153 - T-CODE NOT FOUND

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
153 - T-CODE NOT FOUND

Alarm Description

In tool life data registration, a T code was not specified where one should be. Correct the program.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 153 - T-CODE NOT FOUND) error message below.

Fanuc alarm: 152 - NO SPACE FOR TOOL ENTRY

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
152 - NO SPACE FOR TOOL ENTRY

Alarm Description

The number of tools within one group exceeds the maximum value registerable. Modify the number of tools.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 152 - NO SPACE FOR TOOL ENTRY) error message below.

Fanuc alarm: 151 - TOOL GROUP NUMBER NOT FOUND

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
151 - TOOL GROUP NUMBER NOT FOUND

Alarm Description

The tool group commanded in the machining program is not set. Modify the value of program or parameter.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 151 - TOOL GROUP NUMBER NOT FOUND) error message below.

Fanuc alarm: 150 - ILLEGAL TOOL GROUP NUMBER

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
150 - ILLEGAL TOOL GROUP NUMBER

Alarm Description

Tool Group No. exceeds the maximum allowable value. Modify the program.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 150 - ILLEGAL TOOL GROUP NUMBER) error message below.

Fanuc alarm: 148 - ILLEGAL SETTING DATA

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
148 - ILLEGAL SETTING DATA

Alarm Description

Automatic corner override deceleration rate is out of the settable range of judgment angle. Modify the parameters (No.1710 to No.1714)

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 148 - ILLEGAL SETTING DATA) error message below.

Fanuc alarm: 146 - IMPROPER G CODE

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
146 - IMPROPER G CODE

Alarm Description

G codes which cannot be specified in the polar coordinate interpolation mode was specified. See section II-4.4 and modify the program.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 146 - IMPROPER G CODE) error message below.

Fanuc alarm: 144 - ILLEGAL PLANE SELECTED

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
144 - ILLEGAL PLANE SELECTED

Alarm Description

The coordinate rotation plane and arc or cutter compensation C plane must be the same. Modify the program.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 144 - ILLEGAL PLANE SELECTED) error message below.

Fanuc alarm: 142 - ILLEGAL SCALE RATE

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
142 - ILLEGAL SCALE RATE

Alarm Description

Scaling magnification is commanded in other than 1 -999999. Correct the scaling magnification setting (G51 Pp or parameter 5411 or 5421).

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 142 - ILLEGAL SCALE RATE) error message below.
Subscribe to 0/00/0-mate

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer