0/00/0-mate

Fanuc alarm: 204 - ILLEGAL AXIS OPERATION

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
204 - ILLEGAL AXIS OPERATION

Alarm Description

In the rigid tap, an axis movement is specified between the rigid M code (M29) block and G84 or G74 for M series (G84 or G88 for T series) block. Modify the program.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 204 - ILLEGAL AXIS OPERATION) error message below.

Fanuc alarm: 203 - PROGRAM MISS AT RIGID TAPPING

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
203 - PROGRAM MISS AT RIGID TAPPING

Alarm Description

In the rigid tap, position for a rigid M code (M29) or an S command is incorrect. Modify the program.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 203 - PROGRAM MISS AT RIGID TAPPING) error message below.

Fanuc alarm: 202 - POSITION LSI OVERFLOW

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
202 - POSITION LSI OVERFLOW

Alarm Description

In the rigid tap, spindle distribution value is too large. (System error)

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 202 - POSITION LSI OVERFLOW) error message below.

Fanuc alarm: 201 - FEEDRATE NOT FOUND IN RIGID TAP

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
201 - FEEDRATE NOT FOUND IN RIGID TAP

Alarm Description

In the rigid tap, no F value is specified. Correct the program.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 201 - FEEDRATE NOT FOUND IN RIGID TAP) error message below.

Fanuc alarm: 200 - ILLEGAL S CODE COMMAND

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
200 - ILLEGAL S CODE COMMAND

Alarm Description

In the rigid tap, an S value is out of the range or is not specified. Modify the program.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 200 - ILLEGAL S CODE COMMAND) error message below.

Fanuc alarm: 199 - MACRO WORD UNDEFINED

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
199 - MACRO WORD UNDEFINED

Alarm Description

Undefined macro word was used. Modify the custom macro.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 199 - MACRO WORD UNDEFINED) error message below.

Fanuc alarm: 197 - C-AXIS COMMANDED IN SPINDLE MODE

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
197 - C-AXIS COMMANDED IN SPINDLE MODE

Alarm Description

The program specified a movement along the Cs-axis when the signal CON(DGN=G027#7) was off. Correct the program, or consult the PMC ladder diagram to find the reason the signal is not turned on.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 197 - C-AXIS COMMANDED IN SPINDLE MODE) error message below.

Fanuc alarm: 195 - SPINDLE CONTROL MODESWITCH

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
195 - SPINDLE CONTROL MODESWITCH

Alarm Description

The serial spindle control mode was not switched. Check the PMC ladder
program.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 195 - SPINDLE CONTROL MODESWITCH) error message below.

Fanuc alarm: 194 - SPINDLE COMMAND IN SYNCHRO-MODE

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
194 - SPINDLE COMMAND IN SYNCHRO-MODE

Alarm Description

A contour control mode, spindle positioning (Cs-axis control) mode, or rigid tapping mode was specified during the serial spindle synchronous control mode. Correct the program so that the serial spindle synchronous control mode is released in advance.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 194 - SPINDLE COMMAND IN SYNCHRO-MODE) error message below.

Fanuc alarm: 190 - ILLEGAL AXIS SELECT

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
190 - ILLEGAL AXIS SELECT

Alarm Description

In the constant surface speed control, the axis specification is wrong. (See parameter No. 3770.) The specified axis command (P) contains an illegal value. Correct the program.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 190 - ILLEGAL AXIS SELECT) error message below.
Subscribe to 0/00/0-mate

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer