0/00/0-mate

Servo alarm (5th to 8th axis). A watchdog alarm or a RAM parity error
in the servo module occurred.
Replace the servo control module on the option 2 board.

This is a watchdog timer alarm related to the sub-CPU board or a
servo system alarm for axis 5 or 6. Replace the sub-CPU board or
the axis-5/6 control PC board.

This is a watchdog timer alarm or a servo system alarm for axis 1 to
4. Replace the master or axis control PC board.

This RAM parity error is related to low-order bytes of the ladder editing
cassette. Replace the ladder editing cassette.

This RAM parity error is related to low-order bytes of the ladder editing
cassette. Replace the ladder editing cassette.

This is a local RAM parity error in the digital servo circuit.
Replace the axis control PC board.

For an SRAM parity error, initialize the memory. If the error subsequently
quently recurs, or in the case of a DRAM parity error, replace the
FROM and SRAM modules or memory or spindle modules.
Subsequently, set the parameters and all other data again.

For an SRAM parity error, initialize the memory. If the error subsequently
quently recurs, or in the case of a DRAM parity error, replace the
FROM and SRAM modules or memory or spindle modules.
Subsequently, set the parameters and all other data again.

This RAM parity error is related to low-order bytes. Replace the
memory PC board.

This RAM parity error is related to low-order bytes. Replace the
memory PC board.