CNC Alarms.com
Lookup CNC Machine Alarm Error Messages
Search
0/00/0-mate
Fanuc alarm: 1000 - EXTERNAL ALARM
admin
Fri, 05/01/2009 - 20:49
CNC Machine Control Manufacturer
Fanuc
Control Model
, 0/00/0-mate,
Alarm Description
This alarm was detected by the PMC ladder program. Refer to the
relevant manual from the machine builder for details.
Additional Suggestions & Alarm Clarification
None currently
Help Others
Post troubleshooting recommendations for (Fanuc alarm: 1000 - EXTERNAL ALARM) error message below.
- Read more about Fanuc alarm: 1000 - EXTERNAL ALARM
- Log in to post comments
Fanuc alarm: 998 - ROM PARITY
admin
Fri, 05/01/2009 - 20:49
CNC Machine Control Manufacturer
Fanuc
Control Model
, 0/00/0-mate,
Alarm Description
This is a ROM parity error. Replace the ROM board in which the error
occurred.
Additional Suggestions & Alarm Clarification
None currently
Help Others
Post troubleshooting recommendations for (Fanuc alarm: 998 - ROM PARITY) error message below.
- Read more about Fanuc alarm: 998 - ROM PARITY
- Log in to post comments
Fanuc alarm: 960 - SUB CPU ERROR / DC24V POWER OFF
admin
Fri, 05/01/2009 - 20:49
CNC Machine Control Manufacturer
Fanuc
Control Model
, 0/00/0-mate, 0i
Alarm Description
This is a sub-CPU error. Replace the sub-CPU PC board. The abnormal 24VDC input power may be defective.
Additional Suggestions & Alarm Clarification
None currently
Help Others
Post troubleshooting recommendations for (Fanuc alarm: 960 - SUB CPU ERROR / DC24V POWER OFF) error message below.
Fanuc alarm: 950 - FUSE BLOWN ALARM
admin
Fri, 05/01/2009 - 20:49
CNC Machine Control Manufacturer
Fanuc
Control Model
, 0/00/0-mate,
Alarm Description
A fuse has blown. Replace the fuse (+24E; F14).
Additional Suggestions & Alarm Clarification
None currently
Help Others
Post troubleshooting recommendations for (Fanuc alarm: 950 - FUSE BLOWN ALARM) error message below.
- Read more about Fanuc alarm: 950 - FUSE BLOWN ALARM
- Log in to post comments
Fanuc alarm: 946 - SECOND SERIAL SPINDLE COMMUNICATIONERROR
admin
Fri, 05/01/2009 - 20:49
CNC Machine Control Manufacturer
Fanuc
Control Model
, 0/00/0-mate,
Alarm Description
Communication is impossible with the second serial spindle. Ensure
that the second serial spindle is connected securely.
Additional Suggestions & Alarm Clarification
None currently
Help Others
Post troubleshooting recommendations for (Fanuc alarm: 946 - SECOND SERIAL SPINDLE COMMUNICATIONERROR) error message below.
Fanuc alarm: 945 - SERIAL SPINDLE COMMUNICATIONERROR
admin
Fri, 05/01/2009 - 20:49
CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate,
Alarm Description
Communications error occured in the serial spindle.The optical fiber may be disconnected. The hardware configuration is incorrect for the serial spindle, or a communication alarm occurred. Check the hardware configuration of
the spindle. Also ensure that the hardware for the serial spindle is
connected securely.
Additional Suggestions & Alarm Clarification
None currently
Help Others
Post troubleshooting recommendations for (Fanuc alarm: 945 - SERIAL SPINDLE COMMUNICATIONERROR) error message below.
Fanuc alarm: 941 - MEMORY PC BOARD CONNECTIONERROR
admin
Fri, 05/01/2009 - 20:49
CNC Machine Control Manufacturer
Fanuc
Control Model
, 0/00/0-mate,
Alarm Description
The memory PC board is not connected securely. Ensure that the
PC board is connected securely.
Additional Suggestions & Alarm Clarification
None currently
Help Others
Post troubleshooting recommendations for (Fanuc alarm: 941 - MEMORY PC BOARD CONNECTIONERROR) error message below.
Fanuc alarm: 940 - PC BOARD INSTALLATION ERROR
admin
Fri, 05/01/2009 - 20:49
CNC Machine Control Manufacturer
Fanuc
Control Model
, 0/00/0-mate,
Alarm Description
PC board installation is incorrect. Check the specification of the PC
board.
Additional Suggestions & Alarm Clarification
None currently
Help Others
Post troubleshooting recommendations for (Fanuc alarm: 940 - PC BOARD INSTALLATION ERROR) error message below.
- Read more about Fanuc alarm: 940 - PC BOARD INSTALLATION ERROR
- Log in to post comments
Fanuc alarm: 930 - CPU INTERRUPT
admin
Fri, 05/01/2009 - 20:49
CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
Alarm Description
CPU error (abnormal interrupt). The motherboard or CPU card may be faulty.
Additional Suggestions & Alarm Clarification
None currently
Help Others
Post troubleshooting recommendations for (Fanuc alarm: 930 - CPU INTERRUPT) error message below.
- Read more about Fanuc alarm: 930 - CPU INTERRUPT
- Log in to post comments
Fanuc alarm: 924 - SERVO MODULE SETTING ERROR
admin
Fri, 05/01/2009 - 20:49
CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
Alarm Description
The digital servo module is not installed.
Check that the servo control module or servo interface module on the
main CPU or option 2 board is mounted securely.
Additional Suggestions & Alarm Clarification
None currently
Help Others
Post troubleshooting recommendations for (Fanuc alarm: 924 - SERVO MODULE SETTING ERROR) error message below.
- Read more about Fanuc alarm: 924 - SERVO MODULE SETTING ERROR
- Log in to post comments
Need CNC Machine Parts?
Advertisement
Contribute to CNC Alarms Database
Post your own comments and CNC tips. Help grow and collaborate one of the largest CNC alarm listing databases for Machinists, Maintenance, CNC Programmers, CNC hobby and DIY CNC guys. Learn how to troubleshoot CNC alarms and find answers for machine problems.
Need Help?
Can't find the answer? Ask others by posting in the
CNC Professional Forum
CNC Control OEM's
Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer