Yaskawa

The tool ionformation of the same group NO. is registered with one group NO.

A value other then 1 < Tool NO. < 50 is instructed as the tool no. A value other than 1 < compensation memory NO. < 50 is instructed as the compensation memory NO. values other 0 or more than 20 are instructed as __ __ (group NO.) commands of T __ __ 90 to T __ __ 95 and T __ __ 99 commands.

COORDINATE ROTATIONS COMMAND (G54) IS COMMANDED DURING COMPENSATION C, IN THE COORDINATE ROTATION OF THE EASY SETTER SPECIFICATION. OR PLANE OTHER THAN THE X, Y PLANES IS COMMANDED.

THERE IS AN ERROR IN THE FORMAT OF G68 OR G69 COMMAND BLOCK.

G122 and G123 command blocks are not independent commands. The Same tool is registered with more than two groups. The same offset memory no. is used with more than two tools. Addresses other P,L and T are instructed to the toll information registration program.

G CODE THAT CANNOT BE USED IN G68 MODE HAS BEEN COMMANDED. G68 HAS BEEN COMMANDED DURING TOOL RADIUS COMPENSATION C.

AN ADDRESS SEARCH OPERATION WAS MADE DURING THE EXECUTION OF SUBPROGRAMS.

PARAMETER #6008 (D7) SET TO 1 AT HIGH SPEED CUTTING COMMAND.

Error in commanding programmed shape formed by G112 Block.