MX1

Yasnac alarm: 13 - Prog error (no adress)

CNC Alarm Error Message
13 - Prog error (no adress)
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3, LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

Address plus no data and next address commanded, or no address plus data.

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 13 - Prog error (no adress)) error message below.

Yasnac alarm: 12 - Overflow (128CH)

CNC Alarm Error Message
12 - Overflow (128CH)
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3, LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

Buffer Capacity overflow in a block (128 Characters)

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 12 - Overflow (128CH)) error message below.

Yasnac alarm: 11 - TV Error

CNC Alarm Error Message
11 - TV Error
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3, LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

Tape vertical parity error

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 11 - TV Error) error message below.

Yasnac alarm: 10 - TH Error

CNC Alarm Error Message
10 - TH Error
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3, LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

Tape horizontal parity error

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 10 - TH Error) error message below.

Yasnac alarm: 5 - ZR Unready (5)

CNC Alarm Error Message
5 - ZR Unready (5)
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3

Yaskawa/Yasnac CNC Machine Alarm Description

Reference point return not completed 5 axis

Additional Suggestions & Alarm Clarification

You tried to initialize a Zero return and it stopped or never started to home out. This can be because you just reconnected the encoder and need to move one revolution on the motor by jogging then power down and up and rezero. It also could be a problem with the encoder as well as not establishing home position properly.

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 5 - ZR Unready (5)) error message below.

Yasnac alarm: 4 - ZR Unready (4)

CNC Alarm Error Message
4 - ZR Unready (4)
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3

Yaskawa/Yasnac CNC Machine Alarm Description

Reference point return not completed 4 axis

Additional Suggestions & Alarm Clarification

You tried to initialize a Zero return and it stopped or never started to home out. This can be because you just reconnected the encoder and need to move one revolution on the motor by jogging then power down and up and rezero. It also could be a problem with the encoder as well as not establishing home position properly.

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 4 - ZR Unready (4)) error message below.

Yasnac alarm: 3 - ZR Unready (Z)

CNC Alarm Error Message
3 - ZR Unready (Z)
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3

Yaskawa/Yasnac CNC Machine Alarm Description

Reference point return not completed Z axis

Additional Suggestions & Alarm Clarification

You tried to initialize a Zero return and it stopped or never started to home out. This can be because you just reconnected the encoder and need to move one revolution on the motor by jogging then power down and up and rezero. It also could be a problem with the encoder as well as not establishing home position properly.

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 3 - ZR Unready (Z)) error message below.

Yasnac alarm: 2 - ZR Unready (Y)

CNC Alarm Error Message
2 - ZR Unready (Y)
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3

Yaskawa/Yasnac CNC Machine Alarm Description

Reference point return not completed Y axis

Additional Suggestions & Alarm Clarification

You tried to initialize a Zero return and it stopped or never started to home out. This can be because you just reconnected the encoder and need to move one revolution on the motor by jogging then power down and up and rezero. It also could be a problem with the encoder as well as not establishing home position properly.

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 2 - ZR Unready (Y)) error message below.
Subscribe to MX1

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer