LX1

Yasnac LX1 CNC control alarms and error codes for machinery repair.

Yasnac alarm: 341 - SERVO ERROR (X)

CNC Alarm Error Message
341 - SERVO ERROR (X)
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3, LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

SERVO ERROR X

Additional Suggestions & Alarm Clarification

Check Drive LEDS for errors or Plug in Pendant into drive to read errors for Newer controls.

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 341 - SERVO ERROR (X)) error message below.

Yasnac alarm: 332 - FUSE (Z)

CNC Alarm Error Message
332 - FUSE (Z)
Control Manufacturer
Yaskawa
Control Model
LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

FUSE BLOWN Z

Additional Suggestions & Alarm Clarification

Check for Fuses and Breakers on Servo Pack drive.

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 332 - FUSE (Z)) error message below.

Yasnac alarm: 331 - FUSE (X)

CNC Alarm Error Message
331 - FUSE (X)
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3, LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

FUSE BLOWN X

Additional Suggestions & Alarm Clarification

Check for Fuses and Breakers on Servo Pack drive.

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 331 - FUSE (X)) error message below.

Yasnac alarm: 320 - NC UNREADY

CNC Alarm Error Message
320 - NC UNREADY
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3, LX1, LX2,

Yaskawa/Yasnac CNC Machine Alarm Description

NC UNREADY P SET NOT READY

Additional Suggestions & Alarm Clarification

The power on circuit for the main control is not ready. There may be another button that needs to be pushed to ready up the control or another machine condition that must be satisfied before NC Ready comes on.

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 320 - NC UNREADY) error message below.

Yasnac alarm: 310 - SERVO OFF

CNC Alarm Error Message
310 - SERVO OFF
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3, LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

SERVO POWER NOT SUPPLIED

Additional Suggestions & Alarm Clarification

Servo Drives are off. Condition exists that is not allowing a power on. Check drives for faults or Fault LEDS.

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 310 - SERVO OFF) error message below.

Yasnac alarm: 272 - P-SET ERROR (Z)

CNC Alarm Error Message
272 - P-SET ERROR (Z)
Control Manufacturer
Yaskawa
Control Model
LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

P SET ERROR Z (IF THIS ERROR OCCURS IN BLOCK WHERE GOO IS CHANGING TO GO1, MACHINE STOPS AFTER COMPLETION OF GOO BLOCK)

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 272 - P-SET ERROR (Z)) error message below.

Yasnac alarm: 271 - P-SET ERROR (X)

CNC Alarm Error Message
271 - P-SET ERROR (X)
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3, LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

P SET ERROR X (IF THIS ERROR OCCURS IN BLOCK WHERE GOO IS CHANGING TO GO1, MACHINE STOPS AFTER COMPLETION OF GOO BLOCK)

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 271 - P-SET ERROR (X)) error message below.

Yasnac alarm: 242 - ZR ERROR-POS (Z)

CNC Alarm Error Message
242 - ZR ERROR-POS (Z)
Control Manufacturer
Yaskawa
Control Model
LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

REFERENCE POINT RETURN AREA ERROR Z.

Additional Suggestions & Alarm Clarification

Move axis to another position before executing zero return.

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 242 - ZR ERROR-POS (Z)) error message below.
Subscribe to LX1

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer