Fanuc alarm: 37 - CAN NOT CHANGE PLANE IN CRC / CAN NOT CHANGE PLANE IN NRC

CNC Machine Control Manufacturer
Fanuc
Control Model
16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i
37 - CAN NOT CHANGE PLANE IN CRC / CAN NOT CHANGE PLANE IN NRC

Alarm Description

G40 is commanded on the plane other than offset plane in cutter compensation B. The plane selected by using G17, G18 or G19 is changed in cutter compensation C mode. Modify the program. The offset plane is switched in tool nose radius compensation. Modify the program.
The offset plane is switched in tool nose radius compensation.
Modify the program.

Additional Suggestions & Alarm Clarification

None currently

Help Others
Post troubleshooting recommendations for (Fanuc alarm: 37 - CAN NOT CHANGE PLANE IN CRC / CAN NOT CHANGE PLANE IN NRC ) error message below.

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer