Yasnac

Yasnac CNC controls

Yasnac-I80 CNC alarm: #0421

CNC Alarm Error Message
#0421
Control Manufacturer
Yaskawa
Control Model
I80

Yaskawa/Yasnac CNC Machine Alarm Description

(1) DEFERENCE POINT RETURN ERROR (X) (2) X-axis has not returned to reference point after command G7.

<p></p>
Help Others
Post your suggestions for troubleshooting and repairing CNC alarm (Yasnac-I80 CNC alarm: #0421) error message below.

Yasnac-I80 CNC alarm: #0415

CNC Alarm Error Message
#0415
Control Manufacturer
Yaskawa
Control Model
I80

Yaskawa/Yasnac CNC Machine Alarm Description

(1) ZR UNREADY (5) (2) Reference point return incomplete (5th-axis)

Additional Suggestions & Alarm Clarification

1. Possible problem with Encoder or cable. 2. Machine condition is not right and you attempted to send the machine home. Check if other axis will home out or cause same condition. 3. Check zero return switch if equiped. 4. Try Changing gridshift to 0 then send home.

<p></p>
Help Others
Post your suggestions for troubleshooting and repairing CNC alarm (Yasnac-I80 CNC alarm: #0415) error message below.

Yasnac-I80 CNC alarm: #0414

CNC Alarm Error Message
#0414
Control Manufacturer
Yaskawa
Control Model
I80

Yaskawa/Yasnac CNC Machine Alarm Description

(1) ZR UNREADY (4) (2) Reference point return incomplete (4th-axis)

Additional Suggestions & Alarm Clarification

1. Possible problem with Encoder or cable. 2. Machine condition is not right and you attempted to send the machine home. Check if other axis will home out or cause same condition. 3. Check zero return switch if equiped. 4. Try Changing gridshift to 0 then send home.

<p></p>
Help Others
Post your suggestions for troubleshooting and repairing CNC alarm (Yasnac-I80 CNC alarm: #0414) error message below.

Yasnac-I80 CNC alarm: #0413

CNC Alarm Error Message
#0413
Control Manufacturer
Yaskawa
Control Model
I80

Yaskawa/Yasnac CNC Machine Alarm Description

(1) ZR UNREADY (Z) (2) Reference point return incomplete. (z-axis)

Additional Suggestions & Alarm Clarification

1. Possible problem with Encoder or cable. 2. Machine condition is not right and you attempted to send the machine home. Check if other axis will home out or cause same condition. 3. Check zero return switch if equiped. 4. Try Changing gridshift to 0 then send home.

<p></p>
Help Others
Post your suggestions for troubleshooting and repairing CNC alarm (Yasnac-I80 CNC alarm: #0413) error message below.

Yasnac-I80 CNC alarm: #0412

CNC Alarm Error Message
#0412
Control Manufacturer
Yaskawa
Control Model
I80

Yaskawa/Yasnac CNC Machine Alarm Description

(1) ZR UNREADY (Y) (2) Reference point return incomplete. (y-axis)

Additional Suggestions & Alarm Clarification

1. Possible problem with Encoder or cable. 2. Machine condition is not right and you attempted to send the machine home. Check if other axis will home out or cause same condition. 3. Check zero return switch if equiped. 4. Try Changing gridshift to 0 then send home.

<p></p>
Help Others
Post your suggestions for troubleshooting and repairing CNC alarm (Yasnac-I80 CNC alarm: #0412) error message below.

Yasnac-I80 CNC alarm: #0411

CNC Alarm Error Message
#0411
Control Manufacturer
Yaskawa
Control Model
I80

Yaskawa/Yasnac CNC Machine Alarm Description

(1) ZR UNREADY (X) (2) Reference point return incomplete (X-axis)

Additional Suggestions & Alarm Clarification

1. Possible problem with Encoder or cable. 2. Machine condition is not right and you attempted to send the machine home. Check if other axis will home out or cause same condition. 3. Check zero return switch if equiped. 4. Try Changing gridshift to 0 then send home.

<p></p>
Help Others
Post your suggestions for troubleshooting and repairing CNC alarm (Yasnac-I80 CNC alarm: #0411) error message below.

Yasnac-I80 CNC alarm: #0402

CNC Alarm Error Message
#0402
Control Manufacturer
Yaskawa
Control Model
I80

Yaskawa/Yasnac CNC Machine Alarm Description

(1) P NUMBER FIGURE OVER (2) P number with 5-digit or more is commanded.

<p></p>
Help Others
Post your suggestions for troubleshooting and repairing CNC alarm (Yasnac-I80 CNC alarm: #0402) error message below.

Yasnac-I80 CNC alarm: #0401

CNC Alarm Error Message
#0401
Control Manufacturer
Yaskawa
Control Model
I80

Yaskawa/Yasnac CNC Machine Alarm Description

(1) N NUMBER FIGURE OVER (2) N number with 5-digit or more is commanded.

<p></p>
Help Others
Post your suggestions for troubleshooting and repairing CNC alarm (Yasnac-I80 CNC alarm: #0401) error message below.

Yasnac-I80 CNC alarm: #0400

CNC Alarm Error Message
#0400
Control Manufacturer
Yaskawa
Control Model
I80

Yaskawa/Yasnac CNC Machine Alarm Description

(1) NUMBER FIGURE OVER (2) O number with 5-digit or more is commanded.

<p></p>
Help Others
Post your suggestions for troubleshooting and repairing CNC alarm (Yasnac-I80 CNC alarm: #0400) error message below.

Yasnac-I80 CNC alarm: #0397

CNC Alarm Error Message
#0397
Control Manufacturer
Yaskawa
Control Model
I80

Yaskawa/Yasnac CNC Machine Alarm Description

(1) INTERRUPT ACTION (TAPE/DIRECT) (2) Interference was made so that re-execution would be impossible.

<p></p>
Help Others
Post your suggestions for troubleshooting and repairing CNC alarm (Yasnac-I80 CNC alarm: #0397) error message below.
Subscribe to Yasnac

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer