LX3

More than 16 types of Tool NO. + compensation memory NO. are attempted to be registered with one group NO.

The tool ionformation of the same group NO. is registered with one group NO.

A value other then 1 < Tool NO. < 50 is instructed as the tool no. A value other than 1 < compensation memory NO. < 50 is instructed as the compensation memory NO. values other 0 or more than 20 are instructed as __ __ (group NO.) commands of T __ __ 90 to T __ __ 95 and T __ __ 99 commands.

G122 and G123 command blocks are not independent commands. The Same tool is registered with more than two groups. The same offset memory no. is used with more than two tools. Addresses other P,L and T are instructed to the toll information registration program.

Error in commanding programmed shape formed by G112 Block.

Error in commanding address word for G112 Block.

M,S,T command in G111, G112 Block

Error in G111 command Block

1st Beveling Portion outside rectangle composed by start and End points or between 45 deg. Straight lines of start to end points and end to start points