LX3

Yasnac LX3 CNC machine control alarms and error codes for troubleshooting and repair of CNC's.

Yasnac alarm: 12 - Overflow (128CH)

CNC Alarm Error Message
12 - Overflow (128CH)
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3, LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

Buffer Capacity overflow in a block (128 Characters)

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 12 - Overflow (128CH)) error message below.

Yasnac alarm: 11 - TV Error

CNC Alarm Error Message
11 - TV Error
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3, LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

Tape vertical parity error

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 11 - TV Error) error message below.

Yasnac alarm: 10 - TH Error

CNC Alarm Error Message
10 - TH Error
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3, LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

Tape horizontal parity error

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 10 - TH Error) error message below.

Yasnac alarm: 2 - ZR Unready (Z)

CNC Alarm Error Message
2 - ZR Unready (Z)
Control Manufacturer
Yaskawa
Control Model
LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

Reference point return not completed Z axis

Additional Suggestions & Alarm Clarification

You tried to initialize a Zero return and it stopped or never started to home out. This can be because you just reconnected the encoder and need to move one revolution on the motor by jogging then power down and up and rezero. It also could be a problem with the encoder as well as not establishing home position properly.

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 2 - ZR Unready (Z)) error message below.

Yasnac alarm: 1 - ZR Unready (X)

CNC Alarm Error Message
1 - ZR Unready (X)
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3, LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

Reference point return not completed X axis

Additional Suggestions & Alarm Clarification

You tried to initialize a Zero return and it stopped or never started to home out. This can be because you just reconnected the encoder and need to move one revolution on the motor by jogging then power down and up and rezero. It also could be a problem with the encoder as well as not establishing home position properly.

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 1 - ZR Unready (X)) error message below.
Subscribe to LX3

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer