LX3

Yasnac LX3 CNC machine control alarms and error codes for troubleshooting and repair of CNC's.

Yasnac alarm: 66 - RESET UNREADY (AFTER EDITING)

CNC Alarm Error Message
66 - RESET UNREADY (AFTER EDITING)
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

CYCLE STARTED WITHOUT RESETTING AFTER EDITING

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 66 - RESET UNREADY (AFTER EDITING)) error message below.

Yasnac alarm: 64 - PROG ERROR (G92,G78,G21)

CNC Alarm Error Message
64 - PROG ERROR (G92,G78,G21)
Control Manufacturer
Yaskawa
Control Model
LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

Rapid Thread PULL-UP value in Z-axis direction in thread cutting with beveling smaller than beveling value set by parameter.

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 64 - PROG ERROR (G92,G78,G21)) error message below.

Yasnac alarm: 63 - PROG ERROR (G92,G78,G21)

CNC Alarm Error Message
63 - PROG ERROR (G92,G78,G21)
Control Manufacturer
Yaskawa
Control Model
LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

Rapid Thread PULL-UP value in X-axis direction in thread cutting with beveling smaller than beveling value set by parameter.

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 63 - PROG ERROR (G92,G78,G21)) error message below.

Yasnac alarm: 62 - PROG ERROR (G32/G33)

CNC Alarm Error Message
62 - PROG ERROR (G32/G33)
Control Manufacturer
Yaskawa
Control Model
LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

Thread cutting commanded in G98 mode, multi-start thread cutting command out of specified range.

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 62 - PROG ERROR (G32/G33)) error message below.

Yasnac alarm: 61 - PROG ERROR (G11/G12 IN THREAD)

CNC Alarm Error Message
61 - PROG ERROR (G11/G12 IN THREAD)
Control Manufacturer
Yaskawa
Control Model
LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

ROUNDING, BEVELING COMMANDED IN THREAD CUTTING BLOCK.

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 61 - PROG ERROR (G11/G12 IN THREAD)) error message below.

Yasnac alarm: 60 - PROG ERROR (G34)

CNC Alarm Error Message
60 - PROG ERROR (G34)
Control Manufacturer
Yaskawa
Control Model
LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

LEAD INCREASE/DECREASE VALUE EXCEEDING MAXIMUM PROGRAMMABLE VALUE DURING VARIABLE LEAD THREAD CUTTING MINUS VALUE OF LEAD COMMANDED.

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 60 - PROG ERROR (G34)) error message below.

Yasnac alarm: 59 - ZR UNREADY

CNC Alarm Error Message
59 - ZR UNREADY
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3, LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

REFERENCE POINT RETURN NOT COMPLETED ON THE AXIS WHICH HAS G29 COMMAND OR G30 COMMAND. LATHE- G28 NOT COMPLETED ON THE AXIS WHICH HAS G29 COMMAND OR REFERENCE POINT RETURN NOT COMPLETED ON THE AXIS WHICH HAS G30 COMMAND.

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 59 - ZR UNREADY) error message below.
Subscribe to LX3

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer