LX1

Yasnac LX1 CNC control alarms and error codes for machinery repair.

Yasnac alarm: 920 - TAPE ERROR
CNC Alarm Error Message
920 - TAPE ERROR
Control Manufacturer
Yaskawa
Control Model
MX1, MX2, MX3, LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

TAPE READING IN ERROR (OFF-LINE)

admin Fri, 09/04/2009 - 12:14

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 920 - TAPE ERROR) error message below.
Yasnac alarm: 910 - TAPE MEM ERROR
CNC Alarm Error Message
910 - TAPE MEM ERROR
Control Manufacturer
Yaskawa
Control Model
MX1, MX2, MX3, LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

MEMORY VERIFYING ERROR (OFFLINE)

admin Fri, 09/04/2009 - 12:14

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 910 - TAPE MEM ERROR) error message below.
Yasnac alarm: 840 - CPU ERROR
CNC Alarm Error Message
840 - CPU ERROR
Control Manufacturer
Yaskawa
Control Model
MX1, MX2, MX3, LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

CPU ERROR (2)

admin Fri, 09/04/2009 - 12:14

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 840 - CPU ERROR ) error message below.
Yasnac alarm: 830 - CPU ERROR
CNC Alarm Error Message
830 - CPU ERROR
Control Manufacturer
Yaskawa
Control Model
MX1, MX2, MX3, LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

CPU ERROR (1)

admin Fri, 09/04/2009 - 12:14

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 830 - CPU ERROR ) error message below.
Yasnac alarm: 820 - ROM ERROR
CNC Alarm Error Message
820 - ROM ERROR
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3, LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

ROM CHECK ERROR. RAM CHECK ERROR. REQUIRES HARDWARE CHECK.

admin Fri, 09/04/2009 - 12:14

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 820 - ROM ERROR) error message below.
Yasnac alarm: 810 - RAM ERROR
CNC Alarm Error Message
810 - RAM ERROR
Control Manufacturer
Yaskawa
Control Model
MX1, MX2, MX3, LX1, LX2,

Yaskawa/Yasnac CNC Machine Alarm Description

RAM CHECK ERROR

admin Fri, 09/04/2009 - 12:14

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 810 - RAM ERROR) error message below.

Yasnac alarm: 392 - TG ERROR (Y) or (Z-LX)

CNC Alarm Error Message
392 - TG ERROR (Y) or (Z-LX)
Control Manufacturer
Yaskawa
Control Model
MX1, MX2, LX1, LX2,

Yaskawa/Yasnac CNC Machine Alarm Description

TAC GENERATOR ERROR Y or Z

Additional Suggestions & Alarm Clarification

Possible encoder, cable, or drive is bad. Swap encoder or drive to try to determine which is the problem. Also some alarms come up on drive on power up with only the main breaker. If it does it

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 392 - TG ERROR (Y) or (Z-LX)) error message below.
Subscribe to LX1

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer